TEI further establish working relationships and discuss the on going business of Selective Electro Brush plating. 

Sifco ASC purchased Liquid Development Company at the end of 2015. Dave and Tina’s visit to Cleveland was to further establish working relationships and discuss the on going business of Selective Electro Brush plating. Some of the topics covered included training, chemical production, chemical sales, agencies and new business opportunity. The visit was extremely successful.

Todd Romanski, Scott Peterson and the Sifco staff made TEI’s visit the success it was. 5 days of meetings and discussions covering TEI’s Australasian agency for the Selective Electro Brush Plating process.

It was agreed that along with the LDC agency, TEI will now be able to offer to their customers the Sifco Selective Plating application. TEI has now been accepted as a Sifco agent. Further details will follow with regards to this.

Having now seen first hand how Sifco operates with the extensive tour of their plating workshop and chemical manufacture, the visit was extremely informative and productive. Giving both Tina and Dave a further insite into the successful operations of Sifco. TEI is very excited at the new prospects and options now available to them and their customers.

Over the next few months we will be able to let our customers and clients know what TEI has in store for the future.  It will be of huge benefit to our Selective Electro Brush plating customers and clients alike.

TEI NZ Limited was engaged by Rentatool in Vung Tau, Vietnam to carry out SIFCO training

Dave Kapluggin was engaged by Rentatool in Vung Tau, Vietnam to carry out training instruction after purchasing the equipment and chemical solutions for Sifco through TEI NZ Limited, who has the Australasian agency.

The training was carried out at the very well equipped workshop in Vung Tau.  Dave was extremely impressed with the Quality of the business and all of the staff and management.

The owner,  Mr Bach Vu Thuy was very switched on, knowing exactly what he wanted.  All the staff at Rentatool had a great appreciation of him as the head of the organisation.  The training was for the repair of the equipment that they rented out and for general repair work for the Oil and Gas plants in Vietnam.  Rentatool was the only company that Dave has been to that has its own Ball Valve Polishing and Lapping Machines.

All of the staff and management were very interested  with the Sifco Selective Brush Plating process and were totally engaged with all of the training.  All aspects of the Sifco Process was talked about.  The plating training covered General Engineering, Hydraulics, Gearboxes, Ball Valves and Miss Machined parts.

The training went extremely well and all of the students received their certificates after the final test was completed.  Dave Kapluggin was looked after very well by all of the members of the management team who were very appreciative and invested in the training.  Different restaurants every night, finishing with 15 of the Rentatool staff members giving Dave a thank you party and certificate presentation.

TEI NZ Limited would like to personally thank Rentatool for their hospitality and generosity making Dave feel so welcomed.  Rentatool was a great example of training excellence.  Thank you!

If you would like to find out more about our Training Packages, please email dave@tei.co.nz or tina@tei.co.nz  for more information

TEI NZ Limited is extremely proud to be able to offer this process to all of their customers in South East Asia, Australia, New Zealand and the rest of the Australasian area.

If you have any queries with regards to this process, then please do not hesitate to contact us.

We’re proud to be launching our Selective Electro Brush Plating repair job shops around New Zealand

TEI (NZ) Limited has the Australasian agency for the LDC & the Sifco Selective Electro Brush Plating repair services. TEI(NZ) Limited offers the training, re-certification and also supply of the chemicals. After selling off the Engineering workshop division in Tauranga last year, we are now very proud to be launching our Selective Electro Brush Plating repair as Jobbing shops around New Zealand.

The stand alone jobbing shops will be run independently of TEI by companies that have been trained and certified as Licence Holders for the repairs. These jobbing shops will be able to offer Onsite Selective Brush Plating Repairs.

This electroplating repair which is able to be done in-situe, is totally portable and can save money on down time as the area is able to be repaired by hand on the specific place of damage.

TEI (NZ) Limited has never before offered this to their new and existing customers in New Zealand, having always serviced their customers from their base in Tauranga, New Zealand. We are very excited to be able to offer the customers based in Auckland and the Waikato region a fully operational workshop located in these busy cities to make the Selective Brush Plating repairs more convenient, efficient, cost effective and more accessible.

We are still looking for suitable businesses or individuals that would be interested in the other licences around New Zealand. If you would be interested in finding out more information about jobbing shop opportunities, please contact either Tina Heath on tina@tei.co.nz   or David Kapluggin on dave@tei.co.nz

TEI (NZ) Limited is well known and our clients are New Zealand wide also covering the whole of Australasia (That being New Zealand, Australia, Asia & the Pacific Islands)   TEI are very proud of the achievements made over the past 20 Years and feel very confident and excited with these changes.  Our customers will be better serviced and looked after with direct Jobbing Shops based in these centers rather than the repairs being serviced from one place in Tauranga.  This Jobbing Shop opportunity has never been offered before

Download our Brochure:- TEI NZ Sifco Defect-Repair Brochure

TEI (NZ) Limited continues to train their international clients for Selective Electro Brush Plating.

Abu Dhabi Aviation engaged TEI (NZ) Limited to carry out a training instruction after buying the equipment and solutions from LDC.  The training was at the very well equipped and show like hangers in Abu Dhabi Airport.  Dave was very impressed with the brush plating set up when he arrived.  This was because of the great staff and Manager Paul Lim.  The training was for the repair and cadmium corrosive protection mainly on Bell Helicopters.  The staff were very attentive and interested in the process.

All of the staff and management were impressed with the Electroplating training and we were extremely happy that the Managing Director of Abu Dhabi Aviation Airport facility took the time out of his busy scheduel to come down to look at the process and to meet with Dave Kapluggin.

The security at the airport was very strict and Dave had to train outside the airport for a couple of days until he received clearance.  This clearance was helped through because of one of the locals was in the training class.  Sometimes it takes up to a month to get the clearance.  The heat was around 43 Degrees Centigrade all of the time but luckily the hanger was air conditioned!!  Abu Dhabi was a wonderful area and the buildings were tremendous.

The training went very well and all of the students received their certificates after the final written test.  Long journey home of about 28 hours in all.

Dave Kapluggin’s expertise and knowledge of the LDC Selective Electro Brush Plating process is extremely thorough.  Abu Dhabi Aviation and Staff were very impressed with the training and thanked TEI for their excellent job.